IPC-1/0-2

Insulation Piercing Connector 8 AWG to 1/0 AWG (Main) ; 10 AWG to 2 AWG (Tap)

Ipc 1 Bolt
  • Used for tap or splice applications
  • Dual rated for insulated copper and aluminum wire
  • For outdoor or indoor installation on energized conductor (tap must not be under load)
  • Exclusive RED “Turbo Spacer” keeps tap side open while main conductor is being tightened
  • Easy to install - captive hardware allows for single wrench installation, no special tools required
  • Suitable for solid and/or stranded conductors (not recommended for use with extra-flexible, fine stranded cables)
  • Double shear-head bolts ensure proper torqueing every time
  • Connections are sealed by an integral rubber grommet
  • Installations are watertight and corrosion free
  • Totally insulated connectors eliminate need for tape or covers
  • No contact at any point during installation with a live part
  • Rated for 600 V, 90° C applications
  • Not approved for submersible applications
  • Meets ANSI C119.4 requirements
  • UL listed per 486A-B

Downloads

Conductor Range

Main 8 AWG - 1/0 AWG
Tap 10 AWG - 2 AWG

Current Rating (AMPS)

Aluminum 150
Copper 190

Product Dimensions

H (in.) 3.70
W (in.) 2.00
L (in.) 3.00
Torque (Inch-Lbs.) 80
Bolt Head Size 1/2"
No. of Bolts 1
Technical Drawing