CH2/0-5858-12-SSH
|

CH2/0-5858-12-SSH

Copper Grounding Harness 2/0 AWG Class A & AA

    • Manufactured using bare stranded copper wire and tin plated heavy-duty copper compression lugs
    • Lugs are factory crimped to the wire ensuring a low resistance connection
    • Suitable for use in industrial, commercial, and residential grounding applications where space is limited
    • Copper stranded conductor is rigid enough to be pre-formed and maintain desired shape, while also remaining flexible enough to account for vibration
    • Suitable for direct burial applications in earth or concrete when used with stainless steel mounting hardware
    • Hardware consists of stainless steel screw/bolt, flat washer, and hex nut as shown
    • Standard bolt length is 1″ – for other lengths, contact factory
    • To order without mounting hardware, remove suffix -STL” and -SSH” from the catalog number

    More Ordering Information:

    • 12″ is the standard length of the cable harness (indicated by the “12” in the catalog number); to order other lengths, ranging from 2″ to 96″, substitute the “12” with the desired length dimension in inches
    • Mounting holes on each end of the harness are the same size, but custom variations can be ordered by changing the stud sizes within the catalog number as shown below:
    • EXAMPLE: A 12″ long #2 AWG cable harness which will accommodate 1/4″ and 3/8″ mounting hardware, catalog number will be CH2-1438-12-SSH
W (in.)0.94
L (in.)2.54
Y (in.)2.01
C (in.)0.72
D (in.)0.66
Download Drawing Here